VOLTAGE-CURRENT SOURCING AND MEASUREMENT INSTRUMENTS
 


Yokogawa
GS610
Source Measure Unit

The GS610 is a highly accurate and highly functional programmable voltage/current source that incorporates voltage/current generation and measurement functions. The maximum output voltage and current are 110 V and 3.2 A, respectively. Evaluation of over a wide range of basic electrical characteristics is possible, because the GS610 can operate as a current source or a current sink.
 
Yokogawa
GS200 Series
DC Voltage / Current Source
The GS200 is a DC voltage/current source that boasts high accuracy, high stability, and high resolution. With its excellent traceability, stability, and 5 1/2-digit resolution, the GS200 generates extremely low-noise DC voltage and current signals that are required for many applications. Additionally, the optional monitoring feature turns the GS200 into a voltage and current measuring instrument.
Voltage source up to ±32 V and current source up to ±200 mA
51/2-digit, 120000-count output resolution
Voltage and current simple monitoring feature (optional)
Programmable output up to 10,000 points
Built-in USB mass storage device
Channel expansion through synchronous operation
Yokogawa
GS820
Multi Channel Source Measure Unit
The GS820 is equipped with two analog channels with each channel consisting of a constant voltage source VS, a constant current source IS, a voltmeter VM, and an ammeter IM. The two source measure channels are isolated.
Keithley
2400 Series
Sourcemeter
Keithley's SourceMeter family is designed specifically for test applications that demand tightly coupled sourcing and measurement. All SourceMeter models provide precision voltage and current sourcing as well as measurement capabilities. Each SourceMeter instrument is both a highly stable DC power source and a true instrument-grade 5 1/2-digit multimeter. The power source characteristics include low noise, precision, and readback. The multimeter capabilities include high repeatability and low noise. The result is a compact, single-channel, DC parametric tester. In operation, these instruments can act as a voltage source, a current source, a voltage meter, a current meter, and an ohmmeter. Manufacturers of components and modules for the communications, semiconductor, computer, automotive, and medical industries will find the SourceMeter instruments invaluable for a wide range of characterization and production test applications.
Keithley
2600A Series
Sourcemeter
Series 2600A System SourceMeter® instruments are Keithley's latest I-V source-measure instruments for use as either a bench-top I-V characterization tool or as a building block component of multi-channel I-V test systems. For bench-top use, Series 2600A instruments feature an embedded TSP® Express Software Tool that allows users to quickly and easily perform common I-V tests without programming or installing software. For system level applications, Series 2600A's Test Script Processor (TSP®) architecture along with new capabilities such as parallel test execution and precision timing provides the highest throughput in the industry to lower the cost of test.
Combines a power supply, true current source, DMM, arbitrary waveform generator, V or I pulse generator with measurement, electronic load, and trigger controller - all in one instrument
Backward code compatible to Series 2600 System SourceMeter® Instruments for drop-in replacement
TSP® Express software tool for Quick and Easy I-V Test
Precision timing and channel synchronization (<500ns)
Parallel test execution for unmatched throughput
20,000 rdg/s provides faster test times and ability to capture transient device behavior
Family of products offers wide dynamic range: 1fA to 10A and 1µV to 200V
TSP-Link® bus allows up to 32 units/64 channels of channel expansion per GPIB or IP address
Keithley
6430
Sub-Femtoamp Remote SourceMeter
The Model 6430 Sub-Femtoamp Remote SourceMeter combines the voltage and current sourcing and measurement functions of Keithley's popular SourceMeter and Source-Measure Unit (SMU) products with sensitivity, noise, and input resistance specifications superior to electrometers. This unique combination of broad functionality and exceptional measurement integrity is made possible by the Model 6430's Remote PreAmp, which offers a very sensitive bi-directional amplifier with sensitive feedback elements for measuring or sourcing currents at the device being tested. The high level signals output by the Remote PreAmp are sent to the controlling mainframe via a two-meter cable. This allows the user to make a direct or very short connection to the signal, minimizing the effects of cable noise.
0.4fA p-p (4E-16A) noise
Remote PreAmp can be located at the signal source to minimize cable noise
>1016Ω input resistance on voltage measurements
High speed - up to 2000 readings/second
Up to 6-1/2-digit resolution
Fast characterization of components with programmable digital I/O and interfaces